1999 Publications

1. Lipo, T., G. Oriti, A. Julian, “Elimination of Common Mode Voltage in Three-Phase Sinusoidal Power Converters,” IEEE Transactions on Power Electronics, Sept. 1999, vol. 14, no. 5, pp. 982-989.

2. Hava, A.M., S.K. Sul, R.J. Kerkman, T.A. Lipo, “Dynamic Overmodulation Characteristics of Triangle Intersection PWM Methods,” IEEE Transactions on Industry Applications, July-Aug. 1999, vol. 35, no. 4, pp. 896-907.

3. Hava, A.M., R.J. Kerkman, T.A. Lipo, “Simple Analytical and Graphical Tools for Carrier Based PWM Methods,” IEEE Transactions on Power Electronics, Jan.1999, vol. 14, no. 6, pp. 49-61.

4. Munoz-Garcia, A., T.A. Lipo, “On-Line Dead Time Compensation Technique for Open-Loop PWM-VSI Drives,” IEEE Transactions on Power Electronics, July 1999, vol. 14, no. 4, pp. 683-689.

5. John, V., B.-S. Suh, T.A. Lipo, “Fast Clamped Short Circuit Protection of IGBTs,” IEEE-IAS Transactions on Industry Applications, Mar.-Apr. 1999, vol. 35, no. 2, pp. 477-486.

6. Munoz-Garcia, A., T.A. Lipo, “Complex Vector Model of the Squirrel Cage Induction Machine Including Instantaneous Rotor Bar Currents,” IEEE Transactions on Industry Applications, Nov.-Dec. 1999, vol. 35, no. 6, pp. 1332-1340.

7. John, V., B.-S. Suh, T.A. Lipo, “High Performance Active Gate Drive for High Power IGBTs,” IEEE-IAS Transactions on Industry Applications, Sept.-Oct. 1999, vol. 35, no. 5, pp. 1108-1117.

8. Toba, A., T.A. Lipo, “Generic Torque-Maximizing Design Methodology of Permanent Magnet Vernier Machine,” IEEE-IEMDC Conference Record, Seattle, WA, May 1999, pp. 522-524.

9. Sarlioglu, B., T.A. Lipo, “Assessment of Power Generation Capability of Doubly-Salient PM Generator,” IEEE-IEMDC Conference Record, Seattle, WA. May 1999, pp. 549-552.

10. Luo, X., T.A. Lipo, “A Synchronous/Permanent Magnet Hybrid AC Machine,” IEEE-IEMDC Conference Record, Seattle, WA. May 1999, pp. 19-21.

11. Lipo, T.A., “Electric Drives Technology - Part Way to Where?,” IEEE-IEMDC Conference Record, Seattle, WA. May 1999,pp. 1-3.

12. Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Performance Improvement of Half Controlled Three Phase PWM Boost Rectifier,” IEEE-PESC Conference Record , Charleston, SC, June-July 1999, vol. 1, pp. 319-324.

13. Lund, R., M.D. Manjrekar, P. Steimer, T.A. Lipo, “Control Strategies for a Hybrid Seven-Level Inverter,” EPE Conference Record, Lausanne, Switzerland, Sept. 1999, CD-ROM.

14. Lyra, R.O.C., B.J. Cardoso-Filho, V. John, T.A. Lipo, “Co-Axial Current Transformer for Test and Characterization of High Power Semiconductor Devices Under Hard and Soft-Switching,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 2009-2016.

15. John, V., B.-S. Suh, T.A. Lipo, “An Active Gate Drive with Three-Stage Control and Fast Protection for High Power IGBTs,” EPE Conference Record, Lausanne, Switzerland, Sept. 1999, CD-ROM.

16. Toba, A., T.A. Lipo, “Novel Dual-Excitation Permanent Magnet Vernier Machine,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 4, pp. 2539-2544.

17. Manjrekar, M.D., T.A. Lipo, “An Auxillary Zero State Synthesizer to Reduce Common Mode Voltage in Three-Phase Inverters,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 1, pp. 54-59.

18. Manjrekar, M.D., P. Steimer, T.A. Lipo, “Hybrid Multilevel Power Conversion System: A Competitive Solution for High Power Applications,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 1520-1527.

19. Qin, D., R. Qu, T.A. Lipo, “A Novel Electric Machine Employing Torque Magnification and Flux Concentration Effects,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 1, pp. 132-139.

20. Osama, M., T.A. Lipo, “Experimental and Finite Element Analysis of an Electronic Pole-Change Drive,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 2, pp. 914-921.

21. Consoli, A., F. Gennaro, V. John, T.A. Lipo, “Effects of the Internal Layout on the Performance of IGBT Power Modules,” COBEP, Foz do Iguassu, Brazil, Sept.1999.

22. Garrigan, N.R., W.L. Soong, C.M. Stephans, A. Storace, T.A. Lipo, “Radial Force Characteristics of a Switched Reluctance Machine,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol.4, pp. 2250-2258.

23. Cardoso-Filho, B.J., T.A. Lipo, “Application of MTO-thyristors in Current Stiff Converters with Resonant Snubbers,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 1871-1878.

24. Cardoso-Filho, B.J., T.A. Lipo, “High Power Converters with Active Snubbers for Variable Speed Drive Applications,” COBEP, Foz do Iguassu, Brazil, Sept.1999.

25. Nho, E.-C., I.-D. Kim, T.A. Lipo, “A New Boost Type Rectifier for a DC Power Supply with Frequent Output Short Circuit,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 2, pp. 1165-1172.

26. Rao, A., T.A. Lipo, A. Julian, “A Modified Single Phase Inverter Topology with Active Common Mode Voltage Rejection,” IEEE-PESC Conference Record, Charleston, SC, June 1999, vol. 2, pp. 850-854.

27. Osama, M., T.A. Lipo, “A Magnetic Relief Scheme for Four Pole Induction Motors,” Proceedings of Conference on Electrical Machines, Converters and Systems. Lisbon, Portugal, Sept. 14-16, 1999, vol.1, pp. I-15 - I-21.

28. Jiang, Q., T.A. Lipo, “Switching Angles and DC Link Voltages Optimization for Multilevel Cascade Inverters,” Electric Machines and Power Systems, July 2000, vol. 28, no. 7, pp. 605-612.

29. Suh, B-S., Y-H. Lee, D.-S. Hyun, T.A. Lipo, “A New Multilevel Inverter Topology with a Hybrid Approach,” European Power Electronics Conference, Lausanne Switzerland., Sept. 1999.

30. Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Complementary Half Controlled Three Phase PWM Boost Rectifier for Multi-DC-Link Applications,” IEEE Applied Power Electronics Conference, New Orleans, Feb. 2000.

31. Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A Comparison of Power Density for Axial Flux Machines Based on General Purpose Sizing Equations,” IEEE Transactions on Energy Conversion, June 1999, vol. 14, no. 2, pp. 185-192.

32. Manjrekar, M.D., T.A. Lipo, S-G Chang, K-S Kim, “Flux Tracking Methods for Direct Field Orientation,” Electrical Machines and Power Systems, 1999, vol. 27, pp. 905-920.