1996 Publications

  1. Chen, S., T.A. Lipo, D. Fitzgerald, “Source of Induction Motor Bearing Currents Caused by PWM Inverters,” IEEE Transactions on Energy Conversion, Mar. 1996, vol. 11, no. 1, pp. 25-32.
  2. Law, J.D., T.J. Busch, T.A. Lipo, “Magnet Circuit Modeling of the Field Regulated Reluctance Machine.  Part I:  Model Development,” IEEE Transactions on Energy Conversion, 1996, vol. 2, no. 1, pp. 49-55.
  3. Law, J.D., T.J. Busch, T.A. Lipo, “Magnet Circuit Modeling of the Field Regulated Reluctance Machine.  Part II:  Saturating Modeling and Results,” IEEE Transactions on Energy Conversion, 1996, vol. 2, no. 1, pp. 56-61.

4.      Chen, S., T.A. Lipo, D. Fitzgerald, “Measurement and Analysis of Induction Motor Bearing Currents in PWM Inverter Drives,” IEEE Transactions on Industry Applications, Nov.-Dec. 1996, vol. 32 , iss. 6 , pp. 1365 – 1370.

5.      Zhao, Y., T.A. Lipo, “Field-Oriented Control of Multi-Phase Induction Machine with Structural Unbalance,” APEC Conference Record, 1996, pp. 380-386.

6.      Osama, M., T.A. Lipo, “A New Inverter Control Scheme for Induction Motor Drives Requiring Wide Speed Range,” IEEE Transactions on Industry Applications, July-Aug. 1996, vol. 32, no. 4, pp. 938-944.

7.      Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 578-584.

8.      Leonardi, F., T. Matsuo, T.A. Lipo, “Iron Loss Calculation for Synchronous Reluctance Machines,” IEEE-PEDES, Jan. 8-11, 1996, pp. 307-312.

9.      Zhao, Y., T.A. Lipo, “An Approach to Modeling and Field-Oriented Control of a Three-Phase Induction Machine with Structural Unbalance,” IEEE-APEC Conference Record, Apr. 1996, pp. 380-386.

10.  Julian, A., D. Divan, T. Lipo, F. Nozari, P. Mezs, “Double Bridge Resonant DC Link Converter with Variable Input and Output Frequency,” IEEE-APEC Conference Record, Apr. 1996, pp. 181-186.

11.  Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE-IAS Conference Record, San Diego, CA, Oct. 6-11, 1996, pp. 980-987.

12.  De Broe, A.M., A.L. Julian, T.A. Lipo, “Neutral-to-Ground Voltage Minimization in a PWM-Rectifier/Inverter Configuration,” IEE Conference on Power Electronics and Variable Speed Drives, Sept. 23-25, 1996, pp. 564-568.

13.  Bernet, S., T. Matsuo, T.A. Lipo, “A Matrix Converter Using Reverse Blocking NPT-IGBT’s and Optimized Pulse Patterns,” IEEE-PESC Conference Record, June 1996, pp. 107-113.

14.  Leonardi, F., Y. Li, T. Matsuo, T.A. Lipo, P. McCleer, “Design Considerations and Test Results for a Doubly Salient PM Motor with Flux Control,” IEEE-IAS Conference Record, Oct. 6-11, 1996, pp. 458-463.

15.  Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE-IAS Conference Record, Oct.1996, pp. 836-842.

16.  Lipo, T., G. Oriti, A. Julian, “Elimination of Common Mode Voltage in Three-Phase Sinusoidal Power Converters,” IEEE-PESC,  June 24-27, 1996, pp. 1968-1972.

17.  S. Bhattacharya, L. Resta, D.M. Divan, D.W. Novotny, T.A. Lipo, “Experimental Comparison of Motor Bearing Currents with PWM Hard  and Soft Switched Voltage Source Inverters,” IEEE-PESC, Italy, June 1996, pp. 1528-1534.

18.  Luo, X., D.Qin, T.A. Lipo, “A Novel Two Phase Doubly Salient Permanent Magnet Motor,” IEEE-IAS Conference Record, Oct. 1996, pp. 808-815.

19.  Osama, M., T.A. Lipo, “Modeling and Analysis of a Wide Speed Range Induction Motor Drive Based on Electronic Pole Changing,” IEEE-IAS Conference Record, Oct. 1996, pp. 357-364.

20.  Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Application of the Matrix Converter to Induction Motor Drives,” IEEE-IAS Conference Record, Oct. 1996, pp. 60-67.

21.  Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Modeling and Simulation of Matrix Converter/Induction Motor Drive,” IMACS Conference, Sept.1996.

22.  Zhong, E., T.A. Lipo, J.R. Jaeschke, D. Gritter, “Analytical Estimation and Reduction of Conducted EMI Emissions in High Power PWM Inverter Drives,” IEEE PESC Conference Record, Italy, June 1996, pp. 1169-1175.

23.  Chen, S., T.A. Lipo, D.W. Novotny, “Circulating Type Motor Bearing Current in Inverter Drives,” IEEE-IAS Conference Record,   Oct. 1996, pp. 162-167.

24.  Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE-IAS Conference Record, San Diego, CA, Oct. 1996, pp. 836-842.

25.  Abeyratne, S.G., J. Horikawa, Y. Murai, T.A. Lipo, “Current-Clamped, Modified Series Resonant DC-Link Power Converter and Control Strategies,” IEE Transactions, Japan, 1996, vol. 116-D, no. 11, pp. 1145-1152.

26.  Bernet, S., K. Bernet, T.A. Lipo, “The Auxiliary Resonant Commutated Pole Matrix Converter-A New Topology for High Power Applications,” IEEE-IAS Conference Record, Oct. 1996, pp. 1242-1249.

27.  Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE-IAS Conference Record, Oct.1996,  pp. 980-987.

28.  Leonardi, F., T. Matsuo, Y. Li, T.A. Lipo, P. McCleer, “Design Considerations and Test Results for a Doubly Salient PM Motor with Flux Control,” IEEE-IAS Conference Record, San Diego, CA, Oct. 1996,  pp. 458-463.

29.  Lipo, T.A, “Advanced Motor Technologies: Converter Fed Machines (CFMs),” International Conference on Energy Efficiency Improvements in Electric Motors, Oct. 1996.

30.  Cardoso-Filho, B.J., T.A. Lipo, “Space Vector Analysis and Modulation Issues of Passively Clamped Quasi-Resonant Inverters,” IEEE-IAS Conference Record, 1996, pp. 1179-1185.

31.  Soebagia, H., M. Yochida, Y. Murai, T.A. Lipo, “Input Power Factor Control of AC-DC Series Resonant DC Link Converter Using PID Operation,” IEEE Transactions on Power Electronics, Jan.1996, vol. 11, no. 1, pp. 43-48.

32.  Murai, Y.; S.G. Abeyratne; T.A. Lipo; P. Caldeira, “Current Peak Limiting for a Series Resonant DC Link Power Conversion Using a Saturable Core,” Electric Machines and Power Systems, 1996, vol. 24, no. 1, pp. 51-64.

33.  Chen, S., T.A. Lipo, “A Novel Soft-Switched Inverter for AC Motor Drives,” IEEE Transactions on Power Electronics, July 1996, vol. 11, no. 4, pp. 653-659.

34.  Shakal, A., Y. Liao, T.A. Lipo, “A New Permanent Magnet Motor Structure with True Field Weakening,” Electric Machines and Power Systems, 1996, vol. 24, no. 5, pp. 497-510.

35.  Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance, Part 1:  Machine Modeling and Multi-Dimensional Current Regulator,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 570-577.

36.  Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance, Part 2:  Field Oriented Control and Experimental Verification,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 578-584..

37.  Fu, J.R.; T.A. Lipo, “A Strategy to Isolate the Switching Device Fault of a Current Regulated Motor Drive,” Electrical Machines and Power Systems, Dec. 1996,  vol. 24, no. 8, pp. 911-920.

38.  Caricchi, F., F. Crescimbini, T.A. Lipo, “Study of a Permanent Magnet Excited Axial Flux Electromagnetic Differential Motor for Wheel Direct Drive Application,” SPEEDAM, 1996, vol. C4, pp. 21-28.

39.  Matsuo, T., A. El-Antably, T.A. Lipo, “A New Control Strategy for Optimum Efficiency Operation of a Synchronous Reluctance Motor,” IEEE-IAS Conference Record, Oct. 1996, pp. 109-116.

40.  Kim, G.T., T.A. Lipo, “VSI-PWM Rectifier/Inverter System with Reduced Switch Count,” IEEE Transactions on Industry Applications, Nov.-Dec. 1996, vol. 32, no. 6, pp. 1331-1337.